What is the lubrication system of vertical roller mill

Vertical roller mill is a common milling equipment, so what is the lubrication system of the mill, and how does it work?

 

Vertical roller mill's lubrication system consists of oil tank, oil pump, motor, filter cooler and oil pipe. After the lubricating oil is extracted from the oil tank by the oil pump, the dust is filtered and cooled by the filter cooler, and then enters the two main bearings and the bearings of the drive shaft along the four pipelines. The return oil flows back to the tank through the thicker return pipe. The drive gears of vertical roller  mill parts are lubricated with dry oil, while the roller bearings at both ends of the drive shaft are circulated with thin oil.

 

In order to ensure the normal operation of the vertical roller mill, the lubrication parts should be refueled according to requirements and methods. The specific lubrication location, time and grease name are analyzed as follows: The reel shaft of the transmission is squeezed from the lower oil hole once a month. The central axis of the host No. 3 MOS2 composite calcium-based grease is lubricated once a day, and the grinder roller is added once a shift, and the analysis machine oil pool should use HJ-40 mechanical oil to maintain the oil level line. The bearings need to be lubricated once a month, and the hoist worm gear box needs to maintain the oil level line.mill is a common milling equipment, so what is the lubrication system of the mill, and how does it work?

 

Vertical roller mill's lubrication system consists of oil tank, oil pump, motor, filter cooler and oil pipe. After the lubricating oil is extracted from the oil tank by the oil pump, the dust is filtered and cooled by the filter cooler, and then enters the two main bearings and the bearings of the drive shaft along the four pipelines. The return oil flows back to the tank through the thicker return pipe. The drive gears of vertical roller mill parts are lubricated with dry oil, while the roller bearings at both ends of the drive shaft are circulated with thin oil.

 

In order to ensure the normal operation of the vertical roller mill, the lubrication parts should be refueled according to requirements and methods. The specific lubrication location, time and grease name are analyzed as follows: The reel shaft of the transmission is squeezed from the lower oil hole once a month. The central axis of the host No. 3 MOS2 composite calcium-based grease is lubricated once a day, and the grinder roller is added once a shift, and the analysis machine oil pool should use HJ-40 mechanical oil to maintain the oil level line. The bearings need to be lubricated once a month, and the hoist worm gear box needs to maintain the oil level line.

 

As a professional manufacturer of grinding mills, Shuguang Heavy Machinery sells a variety of different types of mill equipment, including ball mills, Raymond mills, vertical mills, etc.Welcome to contact us for more details.

 

Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City

Contact number: +86-371-67666660 676667

Mobile phone: 0086 13523465141

After-sales Service Department: 0371-67666667