Home>News>Working principle of sand and gravel separator

Working principle of sand and gravel separator

If you are interested in our products, Please get in contact with us .

E-mail: shuguang_mill@163.com Chat Line Send Inquiry

The working principle of the sand and gravel separator is a common question that many good friends will ask our manufacturers recently, so this article describes the working principle of the sand and gravel separator.

 

After the mixing tank truck enters the site and reaches the designated position, press the start switch, and the main body of the sand and gravel separator and the water addition pump start to automatically add water to the tank truck (the time is adjustable: the water addition time is 3~5min).After the filling pump stops working, the flushing pump works automatically at this time, and the tanker rotates to clean the internal concrete residue, and then discharges the waste to the sand and gravel separator discharge tank.The flushing pump at one end of the unloading trough flushes water to the inside of the main body of the sand and gravel separator. At this time, the roller of the sand and gravel separator rotates.Then, the inner screw is used to output the stones from one end of the sand and gravel separator, and the outer screw is used to output the sand from the side of the sand and gravel separator.The waste of the mixing station host can be poured into the unloading tank with a loader, and the entire water adding and separation process can be controlled manually.

 

Sewage is generated during the operation of the sand and gravel separator, and the sewage flows into the slope sedimentation tank and passes through two to three stages of precipitation (sewage is not recovered). The submersible sewage pump is filled with water and flushing pipes of the sand and gravel separator to achieve the effect of water recycling.

 

Sand and gravel separator products have many advantages and great uses. Only by knowing more about this product can we make better use of its actual value.

 

As a professional manufacturer of mining machinery, Shuguang Heavy Machinery sells a variety of different types of mill equipment, crushers,dryers,mixer,etc.Welcome to contact us for more details.

 

Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City

Contact number: +86-371-67666660 676667

Mobile phone: 0086 13523465141

E-mail:Admin@sgzgchina.com

Send Inquiry

We guarantee that your information will not be divulged to third parties and reply to you within 24 hours.

Please enter your demand such as Raw material type, Capacity, Feeding material size, Final product size, etc. To become our quality clients will have access to a discount of contract!

  • Product Name
  • Your Name
  • Your Email
  • Your Phone
  • Requirements

Hot Products