The shutdown sequence of Raymond mill

Enterprises in the production of finished will shut down the machine, the customer in the use of Raymond mill powder machine stop opportunities have non-standard operation, in the past for a long time will damage the Raymond mill, flour mill downtime must be conducted in the following order:
1. The crusher stops feeding and closes the crusher after it is empty in the broken cavity.
2. Turn off the hoist after the material in the elevator is empty.
3. Adjust the vibration of electromagnetic vibration to the minimum and turn off the feeding machine.
4, don't immediately stop the host, to stay within the host materials after grinding (about a minute) turn off the host machine and the host within the material emptying is beneficial to reduce the starting time of the next host motor, prolong the service life of the machine.
5. Turn off the blower half a minute after the main engine stops, and turn the bent handle to the "off" position.
6. Adjust the frequency converter of the classifier to below 10 Hertz and press stop.
The above is the correct and standard order of the shutdown of Raymond mill, hope the enterprise causes attention, so as not to cause unnecessary loss to the inpidual, to the enterprise!