Notice of debugging of superfine Raymond mill.

1, superfine Raymond mill fan to no-load boot, stay working normally again after loading, and then observe its smooth operation, no abnormal sound and vibration, rolling bearing temperature is not higher than 70 ℃, the highest temperature rise no more than 35 ℃.
2, superfine Raymond mill empty load operation commissioning, before the no-load trial, roller device used to mesh wire rolling in mind, to avoid grinding roller and grinding ring contact impact, host idle running of commissioning not less than 1 hour. When the host running smoothly, the casing oil temperature is not higher than 80 ℃, temperature does not exceed 40 ℃.
3, superfine Raymond mill load operation commissioning time not less than 8 hours, mill work after the machine no abnormal noise, the pipe joint no air leakage phenomenon, to keep the solid tighten again, after commissioning can be normal use.
4, Raymond, superfine grinding pressure spring work highly effective height after (compressed) is lower, the greater the pressure on the roller for material, the higher yield, but according to the main motor load situation, with the roller was grinding small gradually compressed. The working height of the pressure spring should be within 200 to 210 mm.