How to solve the noise of Raymond mill?

Quartz sand Raymond mill are widely used in flour industry, but in use process, sometimes a lot of noise, it is indicated that the quartz sand Raymond mill appear problem, how should solve? See below for an analysis of it.

 

The quartz sand Raymond mill is a kind of large powder equipment, in the normal work, with the operation of various parts, it is bound to produce a certain sound. For users, when noise exceeds a certain decibels, it should be noticed.

 

In the production, the quartz sand Raymond mill if there is some big noise, and accompanied by the vibration phenomenon, how should users treat this problem? The operator should stop first, find out why it makes a big noise, and then try to solve it.

 

For the quartz sand Raymond mill, the noise should be solved from the following aspects:

 

1. The operator shall check the anchor bolts and tighten the bolts;

 

2. The operator shall check the feeding quantity and the feeding size, whether it meets the requirements of the quartz sand Raymond mill, and make timely adjustment;

 

3. Check the abrasion degree of the quartz sand Raymond grinding blade, which will lead to the production of materials.

 

4. Check the grinding roller of quartz sand Raymond mill and whether the grinding ring is damaged. These sites can be checked in sequence through elimination, and finally the problem is found. It is worth noting that during the inspection, it is necessary to ensure safe operation.

 

If it is caused by the vibration of the fan caused by the quartz sand Raymond mill, the following reasons should be found:

 

1. Check whether the anchor bolts of the fixed fan are loose;

 

2. Check whether there is a lot of dust deposited on the blades of the quartz sand Raymond mill, which can remove dust or replace the wind leaves;

 

3. Check whether there is serious wear and tear on the fan blades. For the treatment of this problem, the normal wear and tear should be followed.

 

In order to avoid the environmental pollution caused by the noise of Raymond mill, the user should avoid the area with more densely populated areas. The factory must take certain measures to reduce the sound produced by these devices, so that the equipment can be installed in the workshop of the factory, so that the noise can be reduced by the barrier of the workshop.