How to select a good suitable Raymond wear accessories?

Raymond mill parts on the importance of the Raymond mill is equivalent to the role of various organs in human body, so in a timely manner to replace Raymond mill parts is necessary, for the production and life of the Raymond mill is helpful, and the most easy to wear in Raymond mill is grinding roller and grinding ring, and rollers and rings and bearing are inseparable, zhengzhou shuguang below the analysis of the main shaft for everyone should do.
 

1. In order to ensure the rotary precision of the grinding roller, the bearing should have a high matching precision.

 

2. In order to adapt to the deformation of the grinding roller, it is required that the bearing has certain self-potential performance.

 

3. The bearing structure should be easy to assemble and remove, so that the roller can be removed and replaced.

 

4. Considerable load capacity and anti-vibration ability.

 

5. Good heat dissipation capacity.

 

It is easy to speed up the wear and tear of Raymond mill accessories.

 

1. The viscosity of the material, i.e., the greater the viscosity of the material, the easier to stick to it.

 

2. After Raymond grinds the material's fineness, the fineness requirement is high, that is, the thinner the material that is required to be worn by Raymond, the smaller the ability of Raymond mill powder.

 

3. The composition of the material, the more fine powder contained in the material before Raymond mill powder, the more it affects Raymond mill powder, because these fine powder easily adhere to the influence of conveying. For fine powder content should be sifted ahead of time.

 

4. The wearability of Raymond mill in Raymond mill is better than that of Raymond mill. If it is not wear resistant, it will affect the ability of Raymond mill powder.

 

5. The humidity of the material, that is, when the water contained in the material is large, the material is easily adhered to in Raymond mill, and it is easy to be blocked in the conveying process, resulting in the reduction of Raymond mill ability.

 

6. The hardness of the material, the harder it is, the more difficult it will be to grind the materials, and the more serious the wear of the equipment. Raymond grinds at a slow speed, but Raymond has little power.

 

Zhengzhou shuguang heavy industry specializing in the production of Raymond mill equipment manufacturer, we not only production equipment, we also produce Raymond mill spare parts, for production of Raymond mill accessories material we are using wear-resisting durable accessories, accessories of good quality and reliable products. You are welcome to visit the test machine.