Raymond grinds out a small amount of powder.

First of all, Raymond mill relies on a shoveling knife to drop the material into the grinding ring and then crush it into powder under the action of centrifugal force and gravity. If the equipment running time, shovel knife in the case of severe worn cannot scooping up enough materials, such materials between grinding roller grinding ring would be reduced, reducing the quantity of powder Raymond mill. Therefore, regular inspection and replacement of the spatula is an important condition to ensure the efficiency and yield of grinding.

 

Second, when the staff of Raymond mill feed, if can not correctly grasp the feeding way, in the case of a feed or feed too much too fast, the grinding chamber materials gathered too much, not only affects the quality of flour, also prone to congestion, will affect the quantity of powder. In the case of too little feeding or too slow feeding, too little material in the grinding cavity will greatly reduce the production capacity of Raymond mill, resulting in a small amount of powder. Therefore, reasonable feeding mode is an important factor to ensure Raymond mill powder.

 

Third, it is an integral part of Raymond mill's abrasive powder. Under normal circumstances, the ground powder will pass through the wind tunnel into the classifier for screening. If the wind is insufficient, the powder will not be sent out in time, resulting in a small amount of dust.