The working principle of the limestone Raymond mill.

Limestone Raymond mill host process is through the transmission device drives the central axis rotation, with the top of the shaft connected to the plum flower rack, the rack is equipped with roller device and forms swinging pivot, it not only around the center, at the same time roller at the same time, around the orbit of ring roller rotation itself because of the friction effect. Raymond mill plum flower rack bottom is equipped with the shovel system, its position in the roller bottom, turn the shovel with roller in the process of cast material shovel feeding roller ring, between bedding layer formation, the material layer is outward centrifugal force produced by the rotation of roller (extrusion) will material crushing, thus achieve the goal of flour.

 

The analysis machine is used to rotate the 60 blades on the rotary plate through the speed regulating motor and the secondary deceleration, forming the grading effect on the powder. The speed of blade speed is adjusted according to the size of finished powder. When if you want to get a finer granularity FenZi, must improve the blade rotation speed, increase the blade and FenZi contact, make the undesirable FenZi was a leaf into the outer wall away from the air and coarse FenZi due to the gravity into the grinding chamber for resharpening, qualified finished product FenZi in the blade with the airflow within the big cyclone collector, air separation and FenZi were after, FenZi is collected.