What are the classifications of industrial flour mill?

Grinder is in industry, metallurgy, building materials, chemical industry and other industries have a very widely used industrial equipment, its main function is to finely processing, all kinds of mineral products and the hard grinding of raw materials into suitable for the use of mineral powder, often with crusher, due to adopt the principle of different, can be pided into six categories.

 

1. Vertical grinding powder class.

 

Vertical pendulum grinding equipment can be said to be the most old-fashioned one kind of product, its principle is simple, the production cost is low, before is USES the most way of flour on various sites, because of its vertical pendulum running, also make the mill has a nickname, called the "powder machine".

 

2. High pressure roller.

 

Of high voltage suspension kun flour, general use at the construction site may be less, but in the midst of metallurgical industry has obtained the full application, because of the characteristic of this kind of product is high production efficiency, large processing volume, quick powder, fine, well, can be said to be the high-tech again dazzling works reflected, to bring a whole new kind of technology.

 

3. High pressure micro powder.

 

The use of high pressure micro powder mill is mainly used for all kinds of requirements for mineral powder with fine occasions, the grinding powder equipment under grinding of mineral powder is very exquisite, meet the use of all kinds of harsh requirements, in the field of many details are put to use, at the same time because its processing is exquisite, so not very suitable for mass production.

 

4. Straight through centrifugal type.

 

Straight through the milling equipment is running by centrifugal force to flour processing, the advantage is for machine wear and consumption degree comparatively light, and the life of the machine can be relatively longer, and ore grinding out delicate, fruity, grain is uniform, applicable to occasions with higher requirements.

 

Super pressure trapezoidal class.

 

Overpressure in the shape of a trapezoid powder machine in the present range is not very widely used, it is also because of its special function limit, but for some specialised fields, using overpressure trapezium pieces, and is the most efficient way, so the prospect of this kind of product is very big.

 

The intermediate speed of the third ring.

 

Three-ring medium speed type of grinding equipment are generally designed for large supply line corresponding crushing effect, its efficiency of the powder of the medium, but wins in large amount, and can run 24 hours a day, constantly provide all kinds of crushing material, it had a very good role in the industry.

 

In each category of product has a lot of, of course, the classification of different today will be the characteristics of the 3 milling equipment, believe that after we see the products of different classification has a more profound understanding.

 

The characteristics of the ramon mill structure: first of all, it has a three-dimensional structure, small footprint and a complete set of properties, from which it is expected that the powder of the finished product will become a production system independently. Secondly, the fineness of the finished product is uniform and the sieve rate is 99%, which is difficult for other grinding equipment. Finally, the main transmission device of ramon mill adopts airtight gear box and belt wheel, which is stable and reliable. Of course, there are many characteristics of the ramon mill. Superfine mill also has some characteristics of Raymond mill, but the most obvious feature of the ultrafine pulverizer is in terms of fineness, because superfine mill fineness is biggest can reach 3000. The vertical mill is also equipped with a large part of the milling machine, and the biggest feature is that the production of vertical mill is very high.