Several factors influence Raymond's mill output

When using Raymond mill, the user is most concerned about the equipment failure. So, today, the small editor will analyze for you, the impact of Raymond mill production of several major reasons?

 

1. Materials

 

Raymond mill is the dry flour, when the moisture in the material is more, or other impurities, likely to occur in the grinding powder engineering caking phenomenon, thus to larger impact on production equipment. At the same time, long-term down to the equipment itself parts also have certain damage.

 

2, feed inlet

 

The particle size of the feed is too large and too small. When the feed is too large, the material easy to jam the feed, and not easy to realize the grinding roller and grinding ring rolling, the feed is too small, the grinding chamber is not easy to form the material layer, direct contact with the grinding roller and grinding ring, can produce large noise, easy to make the equipment vibration phenomenon, is disadvantageous to Raymond mill operation.

Raymond mills are designed to provide strong wind support. Too little or too much wind can affect equipment production.

 

3, analysis machine

 

Raymond mill USES the motor driven analysis machine, so as to realize the separation of material, analysis of the machine speed can be adjusted, after users to buy, can be adjusted according to the fineness of finished product, if speed is too low, fineness of finished product will be higher, rotational speed is low, particle more in the finished product.

 

4. pipeline

 

The pipe is a complete whole and is generally not allowed to be used separately. The height and Angle of the pipe will affect the output of Raymond mill