Ore roller mill dust precipitator!

According to the principle of boiler dust precipitator, we can be pided into steam dust precipitator, cloth bag dust precipitator, boiler desulfurized dust precipitator, lining kiln bag dust precipitator and so on. For boiler dust catcher, classification, performance, use method, pay attention to the problems we may not be unfamiliar, but the real to the working principle of boiler dust collector may be few, so the boiler dust collector before use, all need to do? How does the boiler dust collector work? How clever will dust eliminate to have very good environmental protection? Listen to professional analysis.

 

Roller mill duster bag duster manufacturer of electric furnace is of high quality

 

Boiler dust collector before start the precipitator, the staff need to check the operating handle, lock switch is normal, check each flange interface, seals are in good condition to prevent gas leakage, check the ash hopper, ChuChen if there is a dust in the pool, if any in a timely manner. During the operation of the precipitator, check the flanged interface and air lock device for air short circuit.

 

The operation steps are as follows:

 

1. Before the boiler dust precipitator stops, it is necessary to prepare the corresponding dust removal work, such as the tools for dust removal, such as vehicles and water pipes.

 

2. When the dust collector stops, open the sealing door of the dust removal tank and dust removal box and soak the dust with water.

 

3. Clean the dust after it has been soaked in water for some time.

 

4. After the dust is removed, half a pond of water is injected into the dust removal tank to prepare for soaking the dust in the next dust removal.

 

5. The door of the dust storage pond must be closed to prevent air from entering the dust precipitator, bringing soot and dust into the atmosphere and directly influencing the dust removal effect.