How to choose the Raymond mill accessories?

Raymond mill in the grinding of material, the different parts of its internal parts play different roles, such as grinding roller grinding ring to play the role of grinding, spade to lift the role of the material, and the bearing has been supported and most of the transmission, and so on, not only that, the different parts of the machine or the importance of the machine. Components, but these different parts of life are limited, when it is damaged, it needs to be replaced, and the replacement needs to choose the parts, then when the Raymond mill parts are selected, what are the factors to refer to?

 

First, the selection of the model

 

Because Raymond mill has different models, different types of equipment can complete the grinding requirements of different materials, and different types of equipment need different components, that is to say, the different types of Raymond mill powder machines need different parts. Therefore, in the selection process of parts, it is necessary to refer to the model of the mill. Otherwise, it will not be able to assist in the smooth production because of the unreasonable installation gap.

 

How to choose Raymond mill accessories

 

Second, the choice of quality

 

For Raymond mill, the replacement of parts is mainly because of the limited life of its parts, need to be replaced, so it is necessary to choose and purchase, so in the selection, we should pay attention to the problem of quality. If the quality is good, the service life will be long, and the frequency of failure in production is also low, so the maintenance cost is low, so The effect of efficiency is also low, but if the quality is not good, many failures in the production, not only affect the production efficiency, but also increase the maintenance cost of Raymond mill, so it is very important for the reference of quality.

 

The main introduction of Raymond mill parts is how to choose the problem, the analysis of this problem is more detailed, mainly two aspects, one is the model reference, the two is the reference of the quality, and introduces the significance of the two aspects for the Raymond mill powder machine. In practice, the model is suitable for the smooth production. And good quality can reduce the occurrence of failures and improve the efficiency of mills.

 

Of course, for the use of Raymond mill, the general purchase of the machine will reserve some parts, but if there is no spare parts or the spare parts are not enough, you need to choose and buy. For reasons such as distance and so on, it is difficult to choose the original factory, so we need to pay attention to the matching of models and the judgement of quality.