The use and maintenance of Raymond mill!

1, Raymond mill must carry out necessary technical training to the operator before installation, so as to understand the principle of Raymond mill, and be familiar with the Raymond mill operation rules. In the process of using Raymond mill, there should be fixed personnel to take charge of it. Operators must have certain technical level.

2. In order to make Raymond mill normal, the equipment "equipment maintenance safety operation system" should be established to ensure the long-term safe operation of the mill, and necessary maintenance tools, grease and corresponding accessories.

3, Raymond mill should be overhauled after a period of time, at the same time to repair and replace the worn parts such as roller mill ring shovel. The roller device should examine the connecting bolt nut carefully before and after use to see if there is any loose phenomenon and whether the grease is added enough.

4, when the Raymond mill roller device uses more than 500 hours to replace the grinding roller, the rolling bearings in the roller sleeve must be cleaned, the damaged parts should be replaced in time, and the refueling tools can be used by manual gas pump and butter gun.

5, when the machine stops, the feed is stopped first, the main engine continues to rotate, and the residual material continues to grind. After about one minute, the motor can be shut down, the grinding work is stopped, and then the motor of the fan and the analyzer motor can be stopped.