Raymond mill easy wear parts！

What are the vulnerable parts of Raymond Mill in the production process? Today, we will discuss them with you.

First of all, we should understand the role and performance of Raymond Mill. It is achieved by extruding and grinding materials. In the process of production, the parts that are directly in contact with the materials will wear out more quickly. The large objects that are assisted in grinding will wear out more slowly, but they are collectively called vulnerable parts.

Raymond Mill mainly shovels up the material by a shovel, then extrudes and grinds it by the high-speed rotation of the grinding roller and the grinding ring. The grinding roller is controlled by the hanging bearing chamber. So these parts are directly in contact with the material, and wear faster and change more frequently. The main parts in sequence are shovel, shovel holder and grinding roller. Roll core, hanger, shaft and pin sleeve.

The second is the grinding ring. The grinding roller is produced by extrusion and grinding with the grinding ring, so the grinding ring wears slightly slower than the previous parts.

The grinding ring is fixed by the air duct, so the air duct is a wearing piece which is worn slowly.

But this is not to say that the fragile parts can be worn at will, its life is based on the material of accessories, one is based on the later customer maintenance to determine the life of your use. Every day to regularly refuel the suspension maintenance, oil suspension can be used according to their own conditions at intervals for maintenance, to extend the life of the bearing inside. If the grinding roller is worn to a certain extent, it must be replaced, otherwise it will damage the roller core inside and reduce the service life of the roller core. Another is the grinding ring, the wearing ring must be replaced after a certain degree of wear, do not think that more work will be okay, if the grinding ring is thorough, it will be involved in the air duct, the air duct can be called the mother of the whole machine, not only to replace the cost is several times the grinding ring, then it will not be worth losing.

So we must check whether the machine's vulnerable parts are in good condition, maintenance is in place, at the right time to replace your vulnerable parts, reduce the cost of waste to a very low enterprise, if you do these two points daily, you will improve production efficiency, relatively save a lot of costs.

Generally speaking, how to choose Raymond Mill accessories is also a very important step. Raymond Mill accessories purchased from a regular manufacturer will make you more comfortable to use and replace them less frequently. The engineer tailored for you the Raymond mill which is more suitable for your production requirements. Later service is the icing on the cake, for you to save a lot of worries, by old and new customers praise!