Raymond mill how can we use the advantages to control the feed granularity?

After grinding, the fineness of the ore is different according to the different application fields. In practice, due to the influence of various factors, the fineness of the pulverized ore will inevitably fall short of the standard. So how can Raymond Mill control the feeding granularity with its own advantages?

It is not in the production that the finer the grain size is, the better. For the grain size of the feed, it needs to be analyzed according to the actual situation. Users can control the grain size of their raw materials according to the characteristics of Raymond Mill. In addition, when purchasing the roller, it is necessary to make clear the type of equipment and the size of the roller. The size of the roller needs to be clear about the diameter, height and diameter of the roller. In the mill chamber of Raymond mill, because there is a certain amount of moisture in the grinding material, heat generation during grinding, vaporization of water and gas, as well as the whole machine pipe interface is not tight, outside gas is sucked in, so that the circulating air pressure increases, to ensure that the mill works under negative pressure, the increased air flow through the residual duct into the dust collector, after being purified into the exhaust. Atmosphere.