Home>News>How is the volume and fineness of Barite Raymond mill regulated?

How is the volume and fineness of Barite Raymond mill regulated?

If you are interested in our products, Please get in contact with us .

E-mail: shuguang_mill@163.com Chat Line Send Inquiry

In the production process of Barite Raymond mill, the regulation of air volume and fineness is often carried out. To meet the needs of mobile users, the Barite Raymond mill rack is designed to be very stable. In order to produce high quality powder, we must master some knowledge of grinding machine adjustment.

Air volume control: the air volume control valve located on the air inlet pipe of the fan is generally opened to a large position and adjusted appropriately according to the requirements of fineness and output. The regulating valve located on the exhaust outlet pipe of the exhaust gas can be adjusted to the place where no dust is ejected. Small air volume and high fineness. However, it should be noted that the air volume is too small, easy to precipitate materials in the air duct below the main engine, please adjust.

Fineness adjustment: according to the size, hardness, water content and specific gravity of the material, the thickness of the processing is also different. The analyzer above can be adjusted for high speed, high fineness, low speed and low fineness. When the fineness is increased, the output will be reduced correspondingly. If the speed of the fan is not up to the requirement, the user can master it flexibly.

The scrap limit of the grinding ring of Barite Raymond mill, the remaining small wall thickness shall not be less than 10mm. When the machine is stopped, the feed is stopped first, so that the residual abrasive can continue grinding. About one minute later, the motor of the machine and the analyzer can be shut down to stop grinding, and then the fan motor can be stopped to clean the residual powder.

Send Inquiry

We guarantee that your information will not be divulged to third parties and reply to you within 24 hours.

Please enter your demand such as Raw material type, Capacity, Feeding material size, Final product size, etc. To become our quality clients will have access to a discount of contract!

  • Product Name
  • Your Name
  • Your Email
  • Your Phone
  • Requirements

Hot Products