Suggestions from ball mill manufacturers

The ball mill needs to be well maintained and maintained in daily industrial production. This is an extremely important and regular work. It should be closely coordinated with the operation and maintenance of the machine. There should be full-time personnel on duty. In daily production, the following points need to be done:

1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the bearing life. It directly affects the service life and operation rate of the machine. Therefore, the required oil must be cleaned and the seal must be good. Main oil filling (1) Rotary bearing (2) Roller bearing (3) All gears (4) Active bearing, sliding plane.
2. The newly installed tires are prone to loosening and must be inspected frequently.
3. Pay attention to whether the work of all parts of the machine is normal.
4, pay attention to check the wear level of wearable parts, always pay attention to replace the worn parts.
5. The plane of the undercarriage of the movable device should be out of dust and other materials to prevent the movable bearing from moving on the chassis when the machine encounters unbreakable materials, resulting in serious accidents.
6, the bearing oil temperature rises, should be stopped immediately to check the reasons to eliminate.
7. If there is impact sound when the rotating gear is running, it should be stopped immediately to check and eliminate


Tel : 0086-371-67666667
E-mail : shuguangzhongji@163.com
Cel : 0086-13523465141 
http://www.sg-shredder.com