Solutions for dry powder mixer machine problems

The dry powder mixer machine includes one mixer and one screw elevator. Install after the purchase according to the instructions,various details will also appear after installation. Zhengzhou Shuguang on how to install for everyone to do a detailed explanation.

 

Problem 1: The dry powder mixer is slow to discharge, and a large amount of participating materials are not clean.

Solution: The motor of the dry powder mixer is reversed, causing the internal stirring ribbon to push the material in the opposite direction to push the material in the direction of the feeding port. The motor can be opened and the position of any two power input lines can be changed.

 

Problem 2: After the hoist is grounded with cement, it can not be maintained.

Solution: The hoist feed hopper is 55 cm wide and 60 cm high. When we dig the pre-buried pit, we can dig the pre-buried pit to a depth of 60 cm and a depth of 70 cm. The soft objects such as woven bags or newspapers can be padded. Then put the hoist feed port into the interior of the pre-buried pit and solve the problem that the hoist cannot be maintained after the cement solidifies. It also protects and reduces the damage caused by vibration.

 

Problem 3: What oil is used in the dry powder mixer reducer?

Solution: The dry powder mixer reducer is usually labeled with the applicable oil on the fuselage. According to the label on the reducer, the gear oil has a shelf life. Please pay attention to the purchase of gear oil. The shelf life is replaced when it expires.

 

Problem 4: How to clean the inside of the mixer for the first time?

Solution: Mix about 200 kg of fine sand in the mixer for 30-60 minutes. Until the inner wall of the mixing drum becomes smooth and free of scum, the discharge port and the bottom cleaning door can be opened to release the sand.

Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City

Contact number: +86-371-67666660 676667

Mobile phone: 0086 13523465141

After-sales Service Department: 0371-67666667