In the work of ultra-fine roller mill, the output of fineness is less than the reason:

India superfine roller mill fineness and production relations of Raymond roller mill roller mill production height is determined by the fineness and, then Raymond roller mill finished product fineness regulation and production of high and low have what relation? On an inch long straight line, how many vertical lines are perpendicular to the screen is how many eyes. The larger the number, the smaller the aperture of the mesh, and the inverse proportion of the mesh to the millimeter. The unit is inversely proportional to the size of the mesh, so it is not a fixed unit. The finer the material is, the more energy it consumes and the lower the output. In the production process of the roller mill, how does the number of the number of the roller mill and the output become inversely proportional to the performance? How is the output and fineness regulated in the process of roller mill? The output and fineness of the roller mill are inversely proportional. As long as the fineness requirement is high, the yield will be low. This is because the high degree of fineness means that the speed of the analytical engine is accelerated, and the coarser materials do not pass, so they must be re-ground. In this way, the grinding time of the powder in the roller mill is increased, which means that the finished product will be consumed for a long time in the unit time, so the quantity will be reduced accordingly. What are the factors that control the particle size adjustment of the roller mill? 1. The diameter of the ring is determined by the diameter of the ring. The larger the diameter of the diaphragm, the shorter the retention time, the larger the particle size, the higher the output, and vice versa. 2. Air volume can be controlled by adjusting the butterfly valve at the outlet end of the ultra-fine roller mill. As the air volume increases, the size of the product increases, and vice versa. 3. Slag discharge, adjust the slag hole size of the slag discharging device to control the discharge amount, and improve the product quality and purity. 4. Graded impeller and interring clearance, the gap decreases and the product becomes thinner; The gap increases and the product becomes thicker. Thus it can be seen that the output of the same type of Raymond roller mill is adjust within a certain range, customers can according to the size of particles of raw materials to adjust the size of the feeding port, and then calculated according to the size of particles of discharging granularity Raymond roller mill production.