Current Position:Home > News > Industry news >

Vertical Roller Mill Manufacturer

Article source:admin Popularity:Dateline:2019-06-12 15:35

Vertical roller mill produced by Shuguang Heavy Industry which is a manufacturer for various series grinding mill, it can also grind many different stones into powder.
In order to meet the needs of users, the machine frame is designed to be very stable. Therefore, if you need to relocate equipment regularly without laying a foundation, you only need to put the equipment on a hard and flat ground. If it is fixed and installed, you can lay a concrete foundation. When installing, please refer to the installation diagram.  Firstly, the main engine is stabilized and fixed, and then funds are raised to install fans, cyclone separators and connecting ducts. The connection flanges of trapezoidal mill are sealed with asbestos rope, rubber or foam plastic. Then, white latex and talc powder are stirred into paste to seal strictly so as to avoid air leakage affecting production.
Main structure of vertical roller mill:
The structure of the vertical roller  mill is mainly composed of a main engine, an analyzer, a fan, a finished cyclone separator, a fine powder cyclone separator and an air duct. The main engine is composed of frame, air inlet volute, shovel cutter, grinding roller, grinding ring and cover.
Working principle of vertical roller mill:
When working, the crushed material will be added into the machine from the hopper on the side of the hood, and revolve around the vertical axis by means of the roller grinding device suspended on the main machine plum blossom rack. At the same time, it will rotate itself. Because of the centrifugal force when rotating, the roller of the powerful mill will swing outward and press tightly on the grinding ring, so that the shovel cutter shovels the material between the grinding roll and the grinding ring, and because of the rolling of the grinding roll. To achieve the purpose of crushing materials.
Air separation process:
After material grinding, the fan of trapezoidal mill blows the wind into the main shell and blows up the powder. The powder is sorted by the analyzer placed above the grinding chamber. The finer material falls into the grinding chamber for re-grinding. The finer material conforms to the specifications enters the cyclone collector with the wind flow. After collecting, it is discharged through the outlet of the powder, which is the finished product. The air flow is returned to the fan by the return duct at the upper end of the large cyclone collector. The air path is circular and flows under negative pressure. The increased air volume of the circulating air path is discharged through the waste gas pipeline between the fan and the main engine and enters the small cyclone collector for purification.
As a manufacturer,Shuguang Heavy Industry has nearly 30 production experience,welcome to contact us if you want to know about information about grinding mill.

Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: +86-371-67666660 676667
Mobile phone: 0086 13523465141
After-sales Service Department: 0371-67666667

Keywords:Vertical Roller Mill Manufacturer

The same article



CNC Processing Hardwa Raymond mill EPS Machine